Restoration of Accident Perodua Axia 2017 Car | Repair | Front Crashed | Rebuilding | Part 2

Today, I want to show you the full process of restoring the front crashed Perodua Axia SE 2017 car (part 2). You can find the service manual D88N (2017) from Shopee. For your information, I'm not a mechanic.

Step 1: Remove Left Headlamp Panel

1. Remove the left headlamp panel and its accessories.

   

   Remove the washer water tank

   

   Remove bottom bolts

   
   

   

   Remove top bolts

   
   

Step 2: Install Left Headlamp Panel

1. Install the left headlamp panel and its accessories.
   
   

   

   Install bottom bolts

   
   

   

   Install top bolts

   
   

   

   Install the washer water tank

   
   

Step 3: Remove Liquid Tube No 1

1. The removal procedures of liquid tube no 1.
   
   

   

   Remove liquid tube no 1 to the expansion valve no 1
   

   
   

   

   Disconnect the pressure sensor connector
   

   
   

   

   Detach broken liquid tube no 1 clip
   

   
   

Step 4: Install Liquid Tube No 1

1. The installation procedure of liquid tube no 1.
   
   

   

   Attach liquid tube no 1 clip

   
   

   

   Install liquid tube no 1 to the expansion valve no 1

   
   

   

   Connect the pressure sensor connector

   
   

Step 5: Install Condenser and Radiator

1. Remove the radiator support hood and its accessories.
   
   

   

   Install fan assembly

   
   

   

   Install the reserve tank assembly
   

   
   

   

   Install the condenser assembly

   
   
2. Place the condenser and radiator assembly into the lower radiator support.
   
   

   

   Radiator support lower
   
   

   

   Install the cap and upper hose of a radiator

   
   
   

   
   
3. Fit the discharge hose and liquid tube no 1.
   
   

   

   Install the discharge hose of the condenser

   
   

   

   Install liquid tube no 1

   
   

Step 6: Install Radiator Support Hood

1. Install the radiator support hood and its accessories.
   
   

   

   Install accessories

   
   

   

   Install the radiator support hood

   
   
2. Install hood lock support.





3. Install seal plate, cooler packing no. 1 (RH), and cooler packing no.1 (LH).
   
   
   
   
   

The link tools and components replacement I used in this video are listed below:

Tools/Components/Items (Shopee):

1. Screwdriver Set
2. Plier Set
3. Cable Tie
4. Spanner Set
5. Soldering Iron (ZD90S)
6. Radiator Axia 2017 Auto (OEM)
7. Condenser Axia (OEM)
8. Liquid Tube Axia No. 1 (OEM)
9. Seal Plate/Cooling Packing No.1
10. Radiator Support Upper
11. Head Lamp Panel RH/LH
12. Fender/Bumper Clip

Tools/Components/Items (Lazada):

1. Screwdriver Set
2. Plier Set
3. Cable Tie
4. Spanner Set
5. Soldering Iron (ZD90S)
6. Radiator Axia 2017 Auto (OEM)
7. Condenser Tube Axia (OEM)
8. Liquid Tube Axia No. 1 (OEM)
9. Seal Plate/Cooling Packing No.1
10. Radiator Support Upper
11. Head Lamp Panel RH/LH
12. Fender/Bumper Clip

Tools/Components/Items (Aliexpress):

1. Screwdriver Set
2. Plier Set
3. Cable Tie
4. Spanner Set
5. Soldering Iron (YF-420A)
6. Fender/Bumper Clip

Video:

That's all from me. If you have any suggestions, please write in the comment section. Thank you for your time 👷.