Sunday, December 18, 2022

Restoration of Accident Perodua Axia 2017 Car | Repair | Front Crashed | Rebuilding | Part 2

Today, I want to show you the full process of restoring the front crashed Perodua Axia SE 2017 car (part 2). You can find the service manual D88N (2017) from Shopee. For your information, I'm not a mechanic.

Step 1: Remove Left Headlamp Panel
  1. Remove the left headlamp panel and its accessories.
    Remove the washer water tank
    Remove bottom bolts

    Remove top bolts

Step 2: Install Left Headlamp Panel
  1. Install the left headlamp panel and its accessories.

    Install bottom bolts

    Install top bolts

    Install the washer water tank

Step 3: Remove Liquid Tube No 1
  1. The removal procedures of liquid tube no 1.

    Remove liquid tube no 1 to the expansion valve no 1

    Disconnect the pressure sensor connector

    Detach broken liquid tube no 1 clip

Step 4: Install Liquid Tube No 1
  1. The installation procedure of liquid tube no 1.

    Attach liquid tube no 1 clip

    Install liquid tube no 1 to the expansion valve no 1

    Connect the pressure sensor connector

Step 5: Install Condenser and Radiator
  1. Remove the radiator support hood and its accessories.

    Install fan assembly

    Install the reserve tank assembly

    Install the condenser assembly

  2. Place the condenser and radiator assembly into the lower radiator support.

    Radiator support lower

    Install the cap and upper hose of a radiator


  3. Fit the discharge hose and liquid tube no 1.

    Install the discharge hose of the condenser

    Install liquid tube no 1

Step 6: Install Radiator Support Hood
  1. Install the radiator support hood and its accessories.

    Install accessories

    Install the radiator support hood

  2. Install hood lock support.



  3. Install seal plate, cooler packing no. 1 (RH), and cooler packing no.1 (LH).



The link tools and components replacement I used in this video are listed below:
No comments:
Labels: , , ,
Subscribe to: Posts (Atom)