Adjustable 3 Jaws Bearing Puller Tool Carbon Steel | LAMAR | Internal External Removal | Review

I ordered 3 jaws bearing pullers from the online retailer and reviewed this tool today. The 3 jaws puller is used to pull off the bearings, couplings, gears, armature, and pulley without damaging them. For your information, this post is not sponsored.

Step 1: Unboxing

1. Unboxing 3 jaws puller LAMAR brand made in China.
   
   
2. Inside the box, it has 3 jaws, 6 bolts and nuts, 1 center screw, 6 links, and 1 yoke.
   

Step 2: Assemble

1. Fit 2 links on a jaw using bolt and nut. Repeat for another 2 jaws.
   
   
   
   
   
2. Fit a center screw with a yoke, then install 3 jaws to the yoke with screws and bolts.
   
   
   
   
   
3. Complete assemble 3 jaws puller.
   
   
   

Step 3: Test

1. For testing purposes, I gonna remove the bearing ceiling fan from the shaft. Adjust and fit the puller around the bearing. Note: position the center bolt to the shaft.
   
   

   

   
   
2. Turn the center bolt slowly until the bearing part is off the shaft. No damage to the bearing and shaft after removal.
   
   
   
   
   
3. Next, I gonna remove the metal cover from the shaft using 3 jaws puller. Follow the same step of removing the bearing from the shaft.
   
   
   
   
   
4. No damage to the metal cover and shaft.
   
   
   
   
   

The link tools and components replacement I used in this video are listed below:

Tools/Components/Items (Shopee):

1. Screwdriver Set
2. 3 Jaws Puller (6 Inches)
3. Bearing (6203ZZ)

Tools/Components/Items (Lazada):

1. Screwdriver Set
2. 3 Jaws Puller (6 Inches)
3. Bearing (6203ZZ)

Tools/Components/Items (Aliexpress):

1. Screwdriver Set
2. 3 Jaws Puller (6 Inches)
3. Bearing (6203ZZ)

Video:

That all from me. If you have any suggestions, please write in the comment section. Thank you for your time 👷.