The AS-10 Photo Sensor is an automatic light control switch designed to turn lamps ON during nighttime and OFF during daytime automatically. This device is commonly used for outdoor lighting such as porch lamps, garden lights, street lights, and billboard lighting to help save electricity and improve convenience.
AS-10 automatically controls lighting based on surrounding brightness.
AS-10 Specifications
The AS-10 photo sensor operates at 220-240VAC with a maximum load capacity of 10A. It is suitable for various AC lighting applications and supports automatic day and night operation without manual switching.
Components Required for Installation
Prepare all tools and components before installation.
Before starting the installation process, prepare all necessary components including the AS-10 photo sensor, lamp and lamp holder, wire cord, connector, screwdriver, and wire cutter. Proper preparation helps make the installation safer and easier.
Understanding AS-10 Wire Functions
Black = LIVE, White = NEUTRAL, Red = LOAD output to lamp.
The AS-10 photo sensor comes with three wires for installation. The black wire is connected to the LIVE or LINE input, the white wire is connected to the NEUTRAL line, and the red wire is connected to the lamp load output.
Wiring Diagram Installation
Follow the wiring diagram carefully for proper installation.
The wiring connection is simple and suitable for basic lighting systems. Connect the black wire to the AC LIVE input, connect the white wire to the AC NEUTRAL line, and connect the red wire to the lamp LIVE wire while the lamp neutral wire connects directly to NEUTRAL.
How to Install AS-10 Photo Sensor
Always switch OFF the power supply before installation.
First, switch OFF the power supply before handling any electrical wiring. Connect all wires securely using suitable connectors and ensure there are no loose connections before turning ON the power supply.
Testing the AS-10 Photo Sensor
Cover the sensor to simulate nighttime condition.
Lamp stays OFF during daytime.
After installation is completed, turn ON the power supply for testing. Cover the AS-10 sensor using a black plastic or dark cover and wait around 5 to 10 seconds until the lamp turns ON automatically. Remove the cover and after another 5 to 10 seconds, the lamp will turn OFF automatically.
Advantages of Using AS-10
The AS-10 photo sensor helps reduce electricity consumption by automatically controlling lighting operation. It also improves convenience by eliminating the need for manual switching and is suitable for both residential and commercial lighting systems.
The AS-10 Photo Sensor is an affordable and practical solution for automatic lighting control. With simple wiring and easy installation, it is ideal for outdoor lighting applications requiring automatic ON and OFF functionality.
No comments:
Post a Comment