Rear wiper not sitting properly? If it’s misaligned, too low, or hitting the car body, it can cause scratches and poor wiping performance. Good news this is a quick DIY fix you can do with basic tools.
 |
| Quick fix for misaligned rear wiper in just 2 minutes. |
⚠️ Common Problem / Symptom
 |
| Signs your rear wiper is out of position. |
- Wiper not aligned with rear glass
- Wiper sitting too low
- Wiper touching or hitting car body
- Uneven wiping area
👉 This usually happens when the wiper arm shifts from its original position.
🔩 Step-by-Step Guide
1️⃣ Remove Bolt Cover
 |
| Open the wiper bolt cover. |
Gently open the plastic cap using your fingers or a small tool.
2️⃣ Remove 10mm Bolt
 |
| Loosen and remove the bolt. |
Use a 10mm socket to remove the bolt holding the wiper arm.
3️⃣ Remove & Reposition Wiper
 |
| Adjust the wiper to correct position. |
Wiggle and pull out the wiper. Reposition it properly horizontal and not touching the body.
4️⃣ Reinstall Wiper
 |
| Install back and tighten. |
Install everything back in reverse order and tighten securely.
5️⃣ Test the Wiper
 |
| Make sure it works smoothly. |
Turn on the wiper and check alignment and movement.
✅ Final Result
- No more hitting body
- Smooth wiping
- Clean rear glass
📦 Where to Buy
Shopee:
Lazada:
🎯 Conclusion
This fix is simple, fast, and beginner-friendly. No need to go workshop you can do it yourself!
No comments:
Post a Comment