How to Replace the Soldering Iron Handle on Your Saike 952D SMD Rework Station 🔧

If you're using the Saike 952D rework station, sooner or later, you might need to replace the soldering iron handle due to wear, damage, or inconsistent heating. In this post, we’ll walk you through the unboxing, installation, and testing of a new replacement handle — step by step! 

Replace the soldering iron handle.

📦 What’s in the Parcel?

We ordered a compatible replacement soldering handle for the Saike 952D, and here’s what came in the parcel:

Components required for replacement.

• ✅ 1x Soldering Iron Handle

• ✅ 2x Spare Heating Elements

• ✅ 🔧 Pre-installed Heating Element in the Handle

That’s right — the new handle already comes with one heating element installed, so it’s ready to use immediately. The additional two spare heating elements are a great bonus for future replacements.

🛠️ How to Replace the Soldering Handle

Replacing the handle is quick and easy. Just follow these simple steps:

1. Power Off & Disconnect

Make sure the Saike 952D is turned off and unplugged for safety. Let the existing handle cool down if recently used.

2. Unplug the Old Handle

Unplug the old handle soldering iron.

Locate the connector of the soldering iron handle at the front of the station. Gently unplug it by unscrewing or pulling it out, depending on the model.

3. Plug In the New Handle

Plug the new handle soldering iron.

Take your new handle and plug it into the same port. Make sure the connection is secure.

🔥 Powering On & Setting the Temperature

Once everything is connected:

Setting the temperature.

1. Turn the Saike 952D back on.

2. Switch to the soldering iron mode.

3. Set your desired temperature — we recommend starting at 350°C for general testing.

The station should recognize the new handle and begin heating immediately.

🧪 Testing the New Handle

Test with the solder wire.

Grab some soldering wire and try it out on a small PCB or scrap components. The heating should be consistent, and the solder should melt smoothly. If everything works well, your replacement is a success!

✅ That’s It — You're Done!

With just a few simple steps, you’ve successfully replaced your Saike 952D soldering iron handle. Whether you're a hobbyist or pro technician, this quick upgrade keeps your station running like new.

📦 Where to Buy

Shopee:

1. Soldering Iron Handle
2. Solder Wire
3. Tip Cleaner

Lazada:

1. Soldering Iron Handle
2. Solder Wire
3. Tip Cleaner

TikTok:

1. Soldering Iron Handle
2. Solder Wire
3. Tip Cleaner

Aliexpress:

1. Soldering Iron Handle
2. Solder Wire
3. Tip Cleaner

🎥 Prefer Video?

We’ve also made a video guide showing the entire unboxing and replacement process.

🙌 Found This Helpful?

If this tutorial helped you out, don’t forget to:

👍 Like
🔁 Share with your maker friends
📲 Subscribe to our YouTube or Shopee store for more electronics tips!