Installing a screen protector shouldn’t feel like rocket science. With WSKEN’s automatic installation kit, you can get a perfect fit with zero dust and zero bubbles — even if it's your first time. In this post, we’ll walk you through the exact steps from our YouTube tutorial on installing the WSKEN screen protector for the iPhone 15 Pro Max.
 |
| WSKEN auto-install kit for iPhone 15 Pro Max |
📦 What’s Inside the WSKEN Kit?
When you open the box, you’ll get:
 |
| WSKEN screen protector for iPhone 15 Pro Max |
 |
| 2 tempered glass screen protectors |
 |
| A scraper to remove bubbles on the screen protector |
- 2 x Tempered Glass Screen Protectors
- 2 x Installation Tools (auto-alignment box)
- 1 x Scraper
- 1 x Manual
- Cleaning tools: wet wipes, dry cloth, and dust absorber
Everything is packed to make your install quick and error-free.
Step-by-Step Instructions
Step 1: Remove Your Old Protector
Start by gently peeling off any cracked or old screen protector.
 |
| Take your time — avoid scratching the screen |
Step 2: Align the New Screen Protector
Next, insert one of the new screen protectors into the top part of the installation box.
 |
| Use the alignment holes so it locks perfectly into place |
Step 3: Place Your Phone and Clean the Screen
Put your iPhone 15 Pro Max into the base of the installation box. Use the provided wet wipe, microfiber cloth, and dust absorber to clean the screen thoroughly.
 |
| Use a wet wipe to remove dirt, grease and etc. |
 |
| After using the wet wipe, dry the screen completely with the microfiber cloth. |
 |
| Dab or tap the sticker across the screen to lift off any leftover dust before installing the screen protector |
Step 4: Close the Box
Close the lid.
 |
| Your phone is now sealed in and protected from any airborne dust during the next step. |
Step 5: Pull the Release Film
Grab the orange pull tab and slide it smoothly. Wait around 20 seconds to let bubbles naturally push out. Then, press on the marked center (usually where the fingerprint reader icon is) to secure the center adhesion.
 |
| This automatically applies the screen protector, aligned and leveled by the tray system. |
Step 6: Remove the Protective Layer
Peel off the top film from the screen protector.
 |
| Your iPhone should now look clean, clear, and polished. |
Step 7: Fix Any Remaining Bubbles
If you see any bubbles left, use the included scraper to push them gently toward the edges.
 |
| Apply light, even pressure—don’t press too hard. |
Step 8: Final Touch — Test Sensitivity
Give the screen a final wipe with the cloth, then unlock your phone, swipe, and type.
 |
| Check if the screen is still responsive — it should feel just like the bare screen. |
✅ Conclusion
Installing the WSKEN screen protector is quick and easy. With the tools provided—wet wipe, cloth, dust absorber, and scraper—you can get a clean, bubble-free result in just a few steps.
It’s perfect for anyone who wants a smooth, stress-free installation. No dust, no mess, just a clear and protected screen for your iPhone 15 Pro Max.
Tools and components
Shopee:
Lazada:
TikTok:
Video
If you found this helpful, don’t forget to like the video, leave a comment, and subscribe to our channel for more tech tips and tutorials! Your support means a lot. 🙌
No comments:
Post a Comment