Revive Your Ride: Fixing the SYM 125 Jet Power Winker or Signal Switch 🛠️

Do you often feel frustrated when your SYM 125 Jet Power's winker switch fails to function? You're not alone. This blog post will guide you through a simple yet effective DIY repair to address this common issue and ensure smooth signalling on your scooter.

Replace the new winker/signal switch.

Step 1: Diagnose Scooter

1. Before diving into any repairs, accurately diagnosing the issue with your SYM 125 Jet Power scooter's winker switch is crucial.
   
   

   

   Test the functionality of the winker switch.

   
   
2. Once you've diagnosed your SYM 125 Jet Power scooter and confirmed that the winker switch is non-responsive or the turn signals are not working correctly, it's time to take action.
   
   

Step 2: Swapping Out the Switch:

1. Let's dive right in! The first step is to remove the front cover (Click HERE for a guide on removing the SYM 125 Jet Power Cover). Once the cover is removed, it's time to remove the old winker switch.
   
   

   

   Remove the broken winker switch.

   
   
2. Once the screws are removed, gently pry the old switch out of its housing. Be sure to handle it with care to avoid damaging any surrounding components.
   
   

   

   Remove the wiring attached to the winker switch.

   
   

   

   Pry out the clip that holds the old switch.

   
   

   

   Push the winker switch out.

   
   

Step 3: Installing the New Switch:

1. With the old switch out of the way, it's time to install the new one. Simply reverse the process, inserting the new switch into the housing. Make sure the switch fits snugly.
   
   

   

   Push the new winker switch to its place.

   
   

   

   Make sure the wiring is connected correctly.

   
   

Step 4: Testing the Functionality

1. Now comes the moment of truth! Turn on your SYM 125 Jet Power and test the winker switch. Observe the indicator on the meter display to confirm that it's functioning as it should.

   

   Winker signal to work in average condition.

   

   Install the front cover and test the winker switch again.

2. Additionally, check the signal lamp to ensure that it's working correctly. If everything looks good, congratulations – you've successfully replaced your winker switch!

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Spanner Set
2. Screwdriver Set
3. Winker Switch

Lazada:

1. Spanner Set
2. Screwdriver Set
3. Winker Switch

Aliexpress:

1. Spanner Set
2. Screwdriver Set 
   
   

Video:

Thanks for tuning in to our DIY winker switch repair guide for the SYM 125 Jet Power. We hope this tutorial has helped resolve any signalling issues you may have encountered. Remember to subscribe to our channel for helpful tips and tutorials, and share this video with your fellow scooter enthusiasts. Until next time, ride safe and happy, signalling!