Water Heater Installation Guide: From Unboxing to Testing TOSHIBA TWH-38EXPMY

When it comes to upgrading your bathroom, installing a water heater is an essential task that can enhance your shower experience. In this step-by-step guide, we’ll take you through the key moments of installing a water heater, from unboxing to the final test. Whether you're a DIY enthusiast or a first-time installer, follow along for a smooth installation process.

Install Instant Water Heater Toshiba TWH-38EXPMY

Step 1: Unboxing

1. First things first, unbox your water heater. Make sure all the parts are included: the main water heater unit, inlet adapters, flexible hose, rain shower set, and the necessary screws, valves, and electrical components. 
   
   

   

   Taking an Inventory of the Items Ensures a Smooth Installation Process

   
   

Step 2: Mount Water Heater

1. With the unit unboxed, the next step is to remove the screws from the water heater’s cover. This will give you access to the inside of the unit, which is essential for proper installation. Use a screwdriver that matches the screw type to avoid damage.
   
   

   

   Remove the Water Heater Cover

   
   
2. Before attaching the water heater to the wall, mark the screw hole locations on all four sides of the water heater. This ensures that your heater is aligned correctly and securely attached.
   
   

   

   Marking Screw Hole Locations

   
   
3. Now it’s time to install the water heater. Secure it to the wall using the screws, making sure it’s level and stable. Double-check the placement before tightening the screws completely.
   
   

   

   Mount Water Heater

   
   

Step 3: Install Piping/Hose

1. Next, install the stop valve, which controls the flow of water to the heater. Ensure it's tightly secured, as it will be crucial for regulating water flow during use.
   
   

   

   Install Hose

   
   
2. Once the stop valve is in place, connect the inlet adapter and the flexible hose to the stop valve. These components allow water to flow into the heater, so it's important to double-check for tight connections to prevent leaks.
   
   

   

   Install Adapter

   
   

Step 4: Install Power Supply

1. Now, it's time to install the electrical components. Begin by installing the 20A switch that controls power to the water heater. Safety first: make sure the power is off before handling any electrical connections.

   

   Install 20A switch

2. Next, install a 15A socket outlet. This will be used to plug in the water heater, so ensure the socket is properly wired and secure. Test it for power once it's installed.

   

   Install a 15A Socket Outlet.

   
   
3. Run the water heater’s power supply using a 3-core cable. Ensure that the wiring is securely connected to both the power source and the water heater.
   

   

   Install Water Heater Supply

   
   

Step 5: Assemble Rain Shower Set and Install

1. Once the heater is mounted and powered, install the rain shower set. This set typically includes a rain shower head and hand shower, which will be connected to the water heater for a luxurious shower experience.

   

   Assemble Rain Shower 1

   
   

   

   Install Rain Shower 2

   
   
2. To attach the rain shower set, mark and drill two holes where you plan to mount the set. Ensure that the placement aligns with your design preferences and that the shower set is secure once installed.

   

   Mark and drill holes to mount the set

3. Connect the water heater outlet to the 3-way valve, and from there, connect the outlet to the hand shower. This step allows you to switch between the rain shower and the hand shower depending on your preference.
   
   

   

   Mount Rain Shower Head

   
   

   

   Install Hand Shower

   
   

   

   Connect the Hose Rain Shower set to the Outlet Water Heater.

   
   

Step 5: Test the Water Heater

1. Rotate the main valve and test the water flow through both the rain shower and the hand shower. Adjust the valve to ensure the flow is even, and make sure that both outlets are functioning properly.

   

   Test Water Flow

2. The final step is to test the system with the pump on. Switch on the power and press the start button on the water heater pump. You should see an increase in water flow, and the temperature control should be responsive.

   

   Test the Water Heater Pump and Temperature

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Screwdriver Set
2. Plier Set
3. Bosch Cordless Drill
   
4. Toshiba Water Heater

Lazada:

1. Screwdriver Set
2. Plier Set
3. Bosch Cordless Drill
4. Toshiba Water Heater

Aliexpress:

1. Screwdriver Set
2. Plier Set
   
   

Video:

If you found this guide helpful, don’t forget to subscribe to our blog for more home improvement tips and tutorials. Be sure to like and share this post with others who might find it useful. Thanks for following along, and enjoy your new water heater setup!

Celebrating Malaysia's Merdeka Day: Honoring Freedom, Creativity, and STEM Innovations

Happy Merdeka Day, Malaysia! We hope you enjoy the celebrations with your family and friends.

Image generated by Canva AI Image

 Thank you for your continued support!

#STEM #creative #Merdeka #indepanceday

How to Repair or Replace the Knee Joint on a 3-Blade KDK Wall Fan - Step-by-Step Guide

In today's tutorial, we will guide you through the process of repairing or replacing the knee joint of a 3-blade KDK wall fan. Follow these steps to get your fan back in working order and enjoy a cool breeze once again.

Replace knee joint wall fan.

Step 1: Safety First

1. Before you begin, make sure to unplug the fan from the power source. Safety is always the first priority when working with electrical appliances.

Step 2: Remove the Fan from the Wall

1. Carefully remove the fan from its wall mount. It might be helpful to have an extra pair of hands to hold the fan steady while you unscrew it from the mount.

Step 3: Disassemble the Fan

1. To access the knee joint, you need to remove the fan guard and blades. Use a screwdriver to remove the screws holding the guard in place, then carefully detach the blades.
   
   

   

   Remove the front fan guard.

   
   

   

   Remove fan knob

   
   

   

   Remove the back fan guard.

   
   
2. Locate the broken knee joint and use your tools to unscrew it from the fan. Make sure to keep the screws in a safe place, as you will need them for the new joint.
   
   

   

   Remove broken knee joint.

   
   
3. Next, you need to remove the main PCB in the control switch compartment to make space for the new knee joint. This step is crucial for proper installation.
   
   

   

   Unscrew compartment.

   
   

   

   Desolder wire.

   
   

Step 4: Swap Components

1. Take the components from the broken knee joint and attach them to the new replacement joint. Ensure everything is fitted securely. 
   
   

   

   Swap components.

   
   

   

   New replacement knee joint.

   
   

Step 5: Assemble the Fan

1. Position the new knee joint in place and secure it with the screws you saved earlier. Tighten them firmly to ensure the joint is stable.

   

   Position the new joint to its original place.

   

   Put some grease on moving parts.

   
   
2. Now, reinstall the other components in the reverse order of removal. This includes the fan blades and the guard.
3. Reassemble the fan by reattaching the blades and the fan guard. Make sure everything is tightly secured to avoid any issues during operation.

Step 5: Test the Fan

1. Plug the fan back in and turn it on to make sure it's working properly. Check that the new knee joint allows the fan to oscillate smoothly and that all functions are operational.

   

   The fan rotates in normal condition.

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Spanner Set
2. Screwdriver Set
3. Knee Joint KDK

Lazada:

1. Spanner Set
2. Screwdriver Set
3. Knee Joint KDK

Aliexpress:

1. Spanner Set
2. Screwdriver Set 
   
   

Video:

And that's it! You've successfully replaced the knee joint of your wall fan. Enjoy your newly repaired fan! For more DIY tips and tutorials, be sure to subscribe to our channel and check out our other videos. Thanks for watching!

Revive Your Ride: Fixing the SYM 125 Jet Power Winker or Signal Switch 🛠️

Do you often feel frustrated when your SYM 125 Jet Power's winker switch fails to function? You're not alone. This blog post will guide you through a simple yet effective DIY repair to address this common issue and ensure smooth signalling on your scooter.

Replace the new winker/signal switch.

Step 1: Diagnose Scooter

1. Before diving into any repairs, accurately diagnosing the issue with your SYM 125 Jet Power scooter's winker switch is crucial.
   
   

   

   Test the functionality of the winker switch.

   
   
2. Once you've diagnosed your SYM 125 Jet Power scooter and confirmed that the winker switch is non-responsive or the turn signals are not working correctly, it's time to take action.
   
   

Step 2: Swapping Out the Switch:

1. Let's dive right in! The first step is to remove the front cover (Click HERE for a guide on removing the SYM 125 Jet Power Cover). Once the cover is removed, it's time to remove the old winker switch.
   
   

   

   Remove the broken winker switch.

   
   
2. Once the screws are removed, gently pry the old switch out of its housing. Be sure to handle it with care to avoid damaging any surrounding components.
   
   

   

   Remove the wiring attached to the winker switch.

   
   

   

   Pry out the clip that holds the old switch.

   
   

   

   Push the winker switch out.

   
   

Step 3: Installing the New Switch:

1. With the old switch out of the way, it's time to install the new one. Simply reverse the process, inserting the new switch into the housing. Make sure the switch fits snugly.
   
   

   

   Push the new winker switch to its place.

   
   

   

   Make sure the wiring is connected correctly.

   
   

Step 4: Testing the Functionality

1. Now comes the moment of truth! Turn on your SYM 125 Jet Power and test the winker switch. Observe the indicator on the meter display to confirm that it's functioning as it should.

   

   Winker signal to work in average condition.

   

   Install the front cover and test the winker switch again.

2. Additionally, check the signal lamp to ensure that it's working correctly. If everything looks good, congratulations – you've successfully replaced your winker switch!

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Spanner Set
2. Screwdriver Set
3. Winker Switch

Lazada:

1. Spanner Set
2. Screwdriver Set
3. Winker Switch

Aliexpress:

1. Spanner Set
2. Screwdriver Set 
   
   

Video:

Thanks for tuning in to our DIY winker switch repair guide for the SYM 125 Jet Power. We hope this tutorial has helped resolve any signalling issues you may have encountered. Remember to subscribe to our channel for helpful tips and tutorials, and share this video with your fellow scooter enthusiasts. Until next time, ride safe and happy, signalling!

Reviving a Dusty PC: A Step-by-Step Deep Cleaning Adventure for a Fresh Start! 🚀✨

Hey, tech enthusiasts! Today, we're trying to transform a dusty and neglected PC into a sparkling, revitalized powerhouse. Join us on this step-by-step journey as we dive into the world of deep cleaning. The layers of dust may seem daunting, but with the right tools and patience, we can give our PC a fresh start.

Before and after deep clean

Step 1: Overview of PC

1. Take a moment to inspect your PC. The dust and grime accumulated on the desktop are undeniable signs that it's time for a deep clean. Don't worry; we've got you covered.
   
   

   

   Dust accumulated at the motherboard and PC fan

   
   

   

   Cobweb and dust at PSU

Step 2: Disassembling PC Components

1. To ensure a thorough cleaning, it's crucial to disassemble the PC components. Grab your toolkit, and let's start by carefully disconnecting cables, unscrewing panels, and removing each component. Think of it as solving a high-tech puzzle.
   
   

   

   Remove RAM

   
   

   

   Remove cable

   
   

   

   Detach motherboard

   
   

Step 3: Cleaning

1. Now that we have our PC in pieces, it's time to tackle the dust. We recommend using an anti-static brush for this task. This gentle tool ensures that we don't create any static electricity that could potentially harm our sensitive components.
   
   

   

   Brush off any dust on the motherboard
   
   

   

   Wipe thermal paste with alcohol pad

   
   

   

   Most crucial part to clean is heatsink
   
   

Step 4: Assembling PC Components

1. With our components sparkling clean, it's time to put the puzzle back together. Assemble the PC components in reverse order, ensuring each piece fits snugly. It's like assembling a high-tech jigsaw puzzle – every click and connection brings us one step closer to a revitalized PC.
   
   

   

   Install PC fan
   
   

   

   Install RAM

Step 5: Finished Overview

1. And there you have it – a freshly cleaned PC! Take a moment to appreciate the transformation. The once-dusty setup is now ready for action, running smoother and looking better than ever.
   
   

   

   Free any dust and cobweb

   
   

   

   Test

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Screwdriver Set
2. Plier Set

Lazada:

1. Screwdriver Set
2. Plier Set
   

Aliexpress:

1. Screwdriver Set 
2. Plier Set

Video:

If you found this PC cleaning guide useful, don't forget to subscribe, like, and share for more tech tips. We hope this step-by-step deep cleaning journey inspires you to give your PC the care it deserves. Happy cleaning and happy computing!