Repairing a Keyboard Wire Chewed by a Mouse - Step-by-Step Guide

Let's kick things off with a classic "uh-oh" moment. You're all set to type away on your computer, but guess what? Your trusty keyboard is acting up, thanks to a certain sneaky mouse who decided to take a nibble out of its wire. Annoying, right? 

The keyboard was chewed by a pesky mouse!

Well, here's the good news: you're in the right place. In this simple, no-nonsense guide, we're going to show you how to fix that chewed-up keyboard wire with no tech wizardry required. It doesn't matter if you're a tech pro or just someone with a curious streak – we've got your back. 

So, let's roll up our sleeves and get that keyboard back to its old, clickety-clackety self. Time to outsmart that pesky mouse! 🛠️🖱️💻🐭

Step 1: Disassembly

Start by disassembling the keyboard using a screwdriver to carefully remove all internal components.

Removing a screw from the back of the keyboard.

Step 2:  Prying Open the Covers

Gently pry open the top and bottom covers of the keyboard. You can use a dedicated pry tool or a Philips screwdriver. 

Be patient and work your way around the edges to avoid causing damage.

Removing all internal components.

Step 3: Cleaning

Use compressed air or a soft brush to thoroughly clean any dust or debris inside the keyboard.

Use a soft brush to remove any debris.

Step 4: Repairing the Wire

Desolder the broken wire from the PCB (printed circuit board).

Desolder attached the wire from the PCB.

Replace it with a new wire of the exact length. Measure the length of the damaged wire accurately.

Strip the wire ends and solder them back onto the PCB, ensuring proper insulation.

Step 6: Reassembly

Carefully put all the internal components back in their original positions.

Install in reverse order of removal.

Step 7: Test

Test the repaired keyboard to ensure it's working correctly. It should type normally once again.

Congratulations! You've successfully repaired your keyboard wire damaged by a pesky mouse.

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (ZD90S)

Lazada:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (ZD90S)

Aliexpress:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (YF-420A)

Video:

By adhering to this easy-to-follow walkthrough, you've triumphantly brought your keyboard back from the brink of despair caused by that sneaky mouse. Routine maintenance, careful cleaning, and prompt repairs can go a long way in ensuring your equipment's durability. As reliable as your trusty keyboard, your engagement means the world to us.

If this guide proves useful in your keyboard-saving mission, be sure to share it with others who may find themselves in a similar predicament. Cheers to successful repairs and hassle-free typing! 🛠️🖱️💻🐭