DIY Solar LED Outdoor Light Repair: Not Turning ON During Nighttime

Are you facing an issue with your LED solar outdoor light not turning on during nighttime? Don't worry; we've got you covered! In this blog, we will guide you through a simple DIY repair to restore the glow to your outdoor nights.

The battery is not connected to the power supply

Step 1: Accessing the Internal Components

1. Remove the four screws holding the solar cover in place to begin the repair. This will grant you access to the inner workings of the LED solar outdoor wall light.
   
   

   

   It's not turning ON when the solar is shaded.

   
   

   

   Removing screws

   
   

Step 2:  Identifying the Issue

1. Check for a loose wire at the battery connection. This could be the reason behind your LED light's nighttime inactivity.
   
   

   

   The battery wire negative is not connected.

Step 3: Temporary Connection and Testing

1. Temporarily reconnect the loose wire to the battery terminal and test the LED light while shading the solar panel. If it lights up, the flexible wire is likely causing the issue.
   
   

   

   LED turning ON

Step 3: Ensuring a Permanent Fix

1. To guarantee a lasting solution, secure the wire using soldering. This will provide a reliable connection, preventing future interruptions to the LED light's functionality.
   
   

   

   Solder the wire to the negative battery

Step 3: Reassembling the Components

1. After soldering the wire, reassemble the LED solar outdoor wall light. Place the solar cover back in position and fasten all four screws tightly to ensure a snug fit.
   
   

   

   Fix the battery back to its original place.

   
   

   

   Tighten the screws

Step 3: Final Testing

1. Test the LED light once more to confirm it activates properly during nighttime hours. Now, you can enjoy well-lit evenings in your outdoor space once again!

It works like a charm!

The link tools and components replacement I used in this video are listed below:

Shopee:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (ZD90S)

Lazada:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (ZD90S)

Aliexpress:

1. Screwdriver Set
2. Plier Set
3. Solder Core Wire (0.6mm)
4. Solder Flux
5. Tweezer ESD
6. Rework Station (SAIKE 952D)
7. Soldering Iron (YF-420A)

Video:

With these straightforward steps, you can easily repair your LED solar outdoor wall light and make the most of your outdoor living spaces at night. Consider showing your support by subscribing to our channel, liking the video, and sharing it with others who might find it helpful. Your support means the world to us! Happy DIYing, and enjoy the beautifully illuminated nights ahead!