How to Reset Perodua Axia Service Reminder Appear at Display | Spanner Symbol

Today, I will share how to reset the Perodua Axia service reminder appearing at the display/dashboard. The spanner symbol appears at the odometer, trip, and other selection displays when you reach10000km driving. It acts as a reminder to send your car to the Perodua service center or change engine oil. Usually, the Perodua service center will reset after serving your car. However, if you DIY or go to a different service center, you need to reset yourself.

Reference:

1. Manua Perodua Axia (2017)
   
   

Steps (Reset ):

1. The spanner symbol appears at the odometer, trip, and other selection displays when you reach10000km driving. It acts as a reminder to send your car to the Perodua service center or change engine oil. Usually, the Perodua service center will reset after serving your car. However, if you DIY or go to a different service center, you need to reset yourself.
   
   
   
   
   
2. Push the reset button until you see '-----' or service information setting display.
   
   
   
   
   
3. Push and hold the reset button for more than 3 seconds or until 'cLEAr' is displayed on the screen.
   
   
   


4. The 'cLEAr' will blink 3 times, and it will restart the count to '10000km'. Once finished, you can change your desired display, e.g., odometer, trip meter, and others.
   
   
   
   
   
5. The spanner symbol will appear again after you drive 10000km to remind you to go to the service center or change engine oil.
   
   
   
   

Video:

If you have any suggestions, please write in the comment section. Thank you for your time 👷.