How to Clean and Service Air Cooler SHARP | PJA36TVB | Teardown | Installation

Hi guys, today I want to share how to clean and service air cooler SHARP (PJA36TVB). Cleaning and servicing the air cooler regularly can restore the performance of the air quality. In addition, it gives health advantages because dust and pollen are accumulated in it. The best way to clean and service the air cooler is by teardown or disassemble all parts. The link tools I used are listed below:

Tools/Components/Items (Shopee):

1. Air Cooler SHARP (PJA36TVB) - https://invol.co/cl55ezw
2. Screwdriver Set - https://invol.co/cl3gqsf
3. Plier Cutter - https://invol.co/cl55f7e
4. Cable Tie - https://invol.co/cl55f83

Tools/Components/Items (Lazada):

1. Air Cooler SHARP (PJA36TVB) - https://bit.ly/36SxngU
2. Screwdriver Set - https://bit.ly/320woJi
3. Plier Cutter - https://bit.ly/3hR9QDo
4. Cable Tie - https://bit.ly/3kFWPOW

Tools/Components/Items (Aliexpress):

1. Screwdriver Set - https://s.click.aliexpress.com/e/_991NUM
2. Plier Cutter - https://s.click.aliexpress.com/e/_AN5NB2
3. Cable Tie - https://s.click.aliexpress.com/e/_APRkIc

Specifications:

• Brand: SHARP
• Model: PJA36TVB
• Dimension (WxHxD): 306 x 745 x 375
• Power Consumption: 65W
• Rated Voltage (V): 220-240
• Rated Frequency (Hz): 50
• Air Volume: 320m³/h
• Fan Speed: 4 (Soft| Low| Middle| High)
• Motor Speed (High Speed): 1150 RPM
• Water Tank Capacity: 6L
• Nett Weight: 7.08 kg

Steps:

1. First, remove the back filter cover, filter and water tank.
   
   



1. Back filter cover






2. Filter



2. Remove front and back covers.





3. Left side back cover screws






4. Right side back cover screws






5. Left side back cover screws






6. Right side back cover screws






7. Bottom cover screws






8. Open back cover



3. In order to deep clean the air cooler, we need to remove all component parts inside the air cooler.





9. Unscrew fan base






10. Unscrew fan base






11. Unscrew wire plug holder






12. Remove fan base






13. Remove electronic parts






14. Remove louvres motor






15. Separate covers






16. Remove electronic parts






17. Remove electronic parts






18. Remove fan motor






19. Unscrew fan shaft






20. Remove handle fan






21. Remove handle fan






22. Pull out fan






23. Unscrew water pump



4. Plastic parts such as filter cover, front cover, back cover, fan and etc should be clean with soap and rinse with water.
   
   

   

   24. Cleaning front cover with soap

   
   
5. For electrical and filter parts just brush off any dust and wipe with a dry cloth.
   
   

   

   25. Wiping water pump using a dry cloth

   
   
6. Next, install all covers and component parts in reverse order removal. Note: Insert grease between fan cover and fan handle. 
   
   

   

   26. Greasing between fan cover and handle

   
   
7. If the process of cleaning the air cooler is complete, try turning on your air cooler. The air it releases feel cooler and has less noise.
   
   
   

   

   Before and after clean and service

Video:

If you have any suggestions, please write in the comment section. Thank you for your time 👷.