How to Replace Car Key Battery Toyota Fortuner | FOB | Electronic and Mechanical Key | CR2032

Today, I want to show you how to replace the car key battery (CR2032 3V) Toyota Fortuner without any tools.

When to change the car key battery?

1. The alarm/notification "Key battery low" appeared on the display meter after the engine started.
   
2. No LED light when pressing button keys.
   

Step:

1. Slide the lock to the right at the backside of the electronic key and pull out the mechanical key.
   
   
   
   
   
   
   
   
2. You can see the slotted behind inside the mechanical key places.
   
   
   
   
   
3. Inside the mechanical key inside the slotted and give a little twist to it.
   
   
   
   
   
4. The two pieces will come apart.
   
   
   
   
   
5. Pry the battery to remove it from the transmitter using a mechanical key.
   
   

   

   
   
6. The battery type is CR2032 3V from Panasonic.
   
   
   
   
   
7. For replacement, I used a CR2032 3V battery from Energizer.
   
   
   
   
   
8. Install all components in reverse order of removal. Note: Ensure the positive (+) is outside and negative (-) inside.
   
   
   
   
   
9. Note: make sure to snap the electronic key after closing the cover.
   
   
   
   
   
10. Test the buttons of the electronic key.
    
    

    

    The LED indicators of an electronic key will light up when the buttons are pressed.

    
    

    

    No "Key battery low" alarm/notification was detected at the display meter after the engine started.

    
    

The link tools and components replacement I used in this video are listed below:

Tools/Components/Items (Shopee):

1. Battery CR2032

Tools/Components/Items (Lazada):

1. Battery CR2032

Tools/Components/Items (Aliexpress):

1. Battery CR2032

Video:

That is all from me. If you have any suggestions, please write in the comment section. Thank you for your time 👷.

How to Change Gear Oil for SYM 125 Jet Power Scooter | Maintenance Operations

Today, I want to show you how to change the gear oil for SYM 125 Jet Power scooter. Most scooters should have a gear oil change between 3000 KM to 5000 KM or 5 months.

What happens if you do not change the gear oil?

1. Corrosion to the gearbox.
2. Gear failure.
   
   

When to change the gear oil?

1. Every 5000 KM or 5 months, whichever comes first.

References:

1. SYM Parts
2. SYM Manual
   
   

Step:

1. Turn off and park the motorcycle with the main stand.
   
   

   

   
   
2. Remove gear oil refilling bolt and draining bolt.
   
   

   
   
   

   

   Removing refilling bolt

   
   
3. Note: Place a container under the oil draining bolt before removing.
   
   

   

   
   
4. Install the oil draining bolt after draining all the gear oil.
   
   

   

   
   
5. I used YAMALUBE gear oil 4T-AT for gear oil replacement.
   
   

   

   
   
6. Cut the tip of the bottle and fit with the tubing.
   
   

   

   
   
7. Fill the gear oil (0.1 liters) from the oil refilling hole.
   
   

   

   
   
8. Install the oil refilling bolt.
   
   

   

   
   
9. Start the engine and check whether the gear oil leaks after the installation.
   
   

   

   
   
10. No leaking was detected on the oil draining and refilling bolt.
    
    

    

    Refilling bolt

    
    

    

    Draining bolt

    
    

The link tools and components replacement I used in this video are listed below:

Tools/Components/Items (Shopee):

1. Spanner Set
2. Gear Oil AT 4T (YAMALUBE)

Tools/Components/Items (Lazada):

1. Spanner Set
2. Gear Oil AT 4T (YAMALUBE)

Tools/Components/Items (Aliexpress):

1. Spanner Set

Video:

That is all from me. If you have any suggestions, please write in the comment section. Thank you for your time 👷.